Component Inspection

INSPECTION





1. INSPECT KEY INTER LOCK SOLENOID
a. Measure the resistance of the solenoid.

Standard Resistance:

If the result is not as specified, replace the solenoid.
b. Apply positive (+) battery voltage between the terminals. Check that sounds are emitted from the operating solenoid.
If sounds are not emitted, replace the solenoid.

HINT: If sounds are not emitted from the solenoid, the solenoid is not operating.





2. INSPECT SHIFT LOCK CONTROL SWITCH
a. Measure the resistance of the switch.

Standard Resistance:

If the result is not as specified, replace the switch.





3. INSPECT KEY INTERLOCK SOLENOID
a. Measure the resistance of the solenoid.

Standard Resistance:

If the result is not as specified, replace the key interlock solenoid.
b. Connect the battery's positive (+) terminal to terminal 2 (KLS+) and the battery's negative terminal to terminal 1 (KLS-). Check that sounds are emitted from the operating solenoid.
If sounds are not emitted, replace the solenoid.

HINT: If sounds are not emitted from the solenoid, the solenoid is not operating.