Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2007 >> RX 350 AWD V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Front Speed Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Speed Sensor

REMOVAL

HINT:
- Use the same procedures for the RH side and the LH side.
- The procedures listed are for the LH side.

1. REMOVE FRONT WHEEL
2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
3. REMOVE FRONT SPEED SENSOR
a. Disconnect the speed sensor connector.




b. Remove the 2 bolts and the clamp from the body and the shock absorber assembly.




c. Remove the bolt and the speed sensor front.

NOTE: Prevent foreign matter from attaching to the sensor tip.

INSTALLATION

1. INSTALL FRONT SPEED SENSOR




a. Install the speed sensor front with the bolt.

Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)

NOTE: Prevent foreign matter from attaching to the sensor tip.




b. Install the speed sensor front with the 2 bolts and the clamp.

Torque: Bolt A 5.0 N.m (51 kgf.cm, 44 in.lbf)
Bolt B 29 N.m (296 kgf.cm, 21 ft.lbf)

NOTE: Do not twist the sensor wire when installing the sensor.

c. Connect the speed sensor connector.

2. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
3. INSTALL FRONT WHEEL

Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf)

4. CHECK ABS SPEED SENSOR SIGNAL
pro multis · About Operation CHARM