Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2007 >> RX 350 FWD V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Central Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Central Control Module: Service and Repair

Network Gateway ECU:




Network Gateway ECU

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE RH
3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
5. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
6. REMOVE NETWORK GATEWAY ECU




a. Disconnect the connector.
b. Remove the screw and the network gateway ECU.

INSTALLATION

1. INSTALL NETWORK GATEWAY ECU




a. Install the network gateway ECU with the screw.
b. Connect the connector.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
5. INSTALL FRONT DOOR SCUFF PLATE RH
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

7. PERFORM INITIALIZATION Testing and Inspection

NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal.
pro multis · About Operation CHARM