Overhaul

DISASSEMBLY

1. REMOVE COOLER DRYER




a. Using a 10 mm hexagon wrench, remove the cap and filter from the modulator.
b. Remove the 2 O-rings from the cap.




c. Using needle nose pliers, remove the cooler dryer.

REASSEMBLY




1. INSTALL COOLER DRYER
a. Using needle nose pliers, install the cooler dryer.
b. Install 2 new O-rings to the cap.
c. Sufficiently apply compressor oil to the contact surfaces of the O-ring and the cap.

Compressor oil: ND-OIL 8 or equivalent

d. Using a 10 mm hexagon wrench, install the cap to the condenser.

Torque: 12.3 N.m (125 kgf.cm, 9 in.lbf)