Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2007 >> SC 430 V8-4.3L (3UZ-FE) >> Repair and Diagnosis >> Lighting and Horns >> Headlamp >> Headlamp Alignment Sensor >> Service and Repair >> Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front

Height Control Sensor (for Front Side):




HEIGHT CONTROL SENSOR (for Front Side)

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT WHEEL




3. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
a. Disconnect the connector.
b. Remove the nut and disconnect the sensor link.
c. Remove the 2 bolts and sensor.

INSTALLATION




1. INSTALL FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
a. Install the sensor with the 2 bolts.

Torque: 7.8 N.m (80 kgf.cm, 69 in.lbf)

b. Install the nut.

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

c. Connect the connector.

2. INSTALL FRONT WHEEL
3. ADJUST HEADLIGHT AIMING
pro multis · About Operation CHARM