Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY:

REMOVAL

1. PRECAUTION
CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

3. REMOVE FRONT DOOR SCUFF PLATE LH Removal

4. REMOVE FRONT DOOR OPENING TRIM COVER LH Removal

5. REMOVE SIDE INSTRUMENT PANEL LH Removal

6. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

7. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal

8. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

9. REMOVE FRONT DOOR SCUFF PLATE RH Removal

10. REMOVE FRONT DOOR OPENING TRIM COVER RH Removal

11. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

12. REMOVE SIDE INSTRUMENT PANEL RH Removal

13. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal

14. REMOVE LOWER INSTRUMENT PANEL RH Removal

15. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

16. REMOVE UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE Removal

17. REMOVE CONSOLE BOX POCKET Removal

18. REMOVE CONSOLE BOX CARPET Removal

19. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY Removal

20. REMOVE REAR CONSOLE BOX ASSEMBLY Removal

21. REMOVE FLOOR CARPET BRACKET LH Removal

22. REMOVE FLOOR CARPET BRACKET RH Removal

23. REMOVE NO. 2 CONSOLE BOX DUCT Removal

24. REMOVE NO. 3 CONSOLE BOX DUCT Removal

25. REMOVE NO. 1 CONSOLE BOX DUCT Removal

26. REMOVE CENTER AIRBAG SENSOR ASSEMBLY
(a) Turn back the carpet.






(b) Disconnect the holder (with connectors).
(c) Remove the 3 bolts and center airbag sensor assembly.