Installation

SEAT BELT: SEAT BELT CONTROL ECU:

INSTALLATION

1. INSTALL SEAT BELT CONTROL ECU






(a) Engage the claw.
(b) Engage the clip.
(c) Install the seat belt control ECU with the 2 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
(d) Connect the connector.
2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH Reassembly

3. INSTALL REAR FLOOR FINISH PLATE Reassembly

4. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Reassembly

5. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY Reassembly

6. INSTALL SPARE WHEEL COVER TRAY
7. INSTALL LUGGAGE COMPARTMENT FLOOR MAT
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. PERFORM INITIALIZATION
NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.

10. INSPECT SRS WARNING LIGHT Diagnosis System