Removal

SEAT BELT: SEAT BELT CONTROL ECU:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
3. REMOVE SPARE WHEEL COVER TRAY
4. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY Disassembly

5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Disassembly

6. REMOVE REAR FLOOR FINISH PLATE Disassembly

7. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH Disassembly

8. REMOVE SEAT BELT CONTROL ECU






(a) Disconnect the connector.
(b) Remove the 2 bolts.
(c) Disengage the claw and clip and remove the seat belt control ECU.