Removal

SUSPENSION CONTROL: ACCELERATION SENSOR:

REMOVAL

1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE LH Removal

3. REMOVE COWL SIDE TRIM BOARD LH Removal

4. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 1 Removal

5. REMOVE INSTRUMENT PANEL FINISH PLATE Removal

6. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER Removal

7. REMOVE INSTRUMENT PANEL LOWER LH
8. REMOVE FRONT ACCELERATION SENSOR






(a) Disconnect the connector from the front acceleration sensor.
(b) Remove a bolt and the acceleration sensor.
9. REMOVE NO. 2 REAR SEAT ASSEMBLY LH
10. REMOVE QUARTER SCUFF PLATE INSIDE LH
11. REMOVE REAR DOOR SCUFF PLATE LH
12. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
13. REMOVE BACK DOOR WEATHERSTRIP
14. REMOVE REAR FLOOR MAT SUPPORT PLATE REAR
15. REMOVE QUARTER INSIDE TRIM BOARD LH
16. REMOVE REAR ACCELERATION SENSOR






(a) Disconnect the connector.
(b) Remove a clip, bolt and the rear acceleration sensor.