Removal

1UR-FSE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING CONTROL MOTOR: REMOVAL

REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal

3. REMOVE NO. 1 AIR CLEANER INLET Removal

4. REMOVE INTAKE AIR CONNECTOR PIPE Removal

5. REMOVE CAMSHAFT TIMING CONTROL MOTOR RH





(a) Disconnect the 2 camshaft timing control motor connectors.
(b) Remove the bolt and engine wire bracket.






(c) Remove the 3 bolts and camshaft timing control motor.
(d) Remove the O-ring from the timing chain cover.
6. REMOVE CAMSHAFT TIMING CONTROL MOTOR LH





(a) Disconnect the 2 camshaft timing control motor connectors and engine wire clamp.






(b) Remove the 3 bolts and camshaft timing control motor.
(c) Remove the O-ring from the timing chain cover.