Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2008 >> LS 460 V8-4.6L (1UR-FSE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Steering and Suspension >> Relays and Modules - Steering >> Steering Control Module >> Service and Repair >> Power Steering ECU >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal








POWER STEERING: POWER STEERING ECU: REMOVAL

REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER
(a) Remove the 4 clips and side cover.
2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY
(a) Remove the 2 clips and inlet cover.
3. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

5. REMOVE POWER STEERING ECU





(a) Release the locks of the 2 power steering ECU connectors A and B and disconnect the connectors.
(b) Disconnect the connector C from the power steering ECU.






(c) Remove the 4 bolts and detach the claw, and remove the power steering ECU.
pro multis · About Operation CHARM