Removal

U151F AUTOMATIC TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: REMOVAL

REMOVAL

1. REMOVE BATTERY

2. REMOVE NO. 2 AIR CLEANER INLET

3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

5. REMOVE NO. 1 AIR CLEANER INLET

6. REMOVE INTAKE AIR RESONATOR SUB-ASSEMBLY

7. REMOVE AIR CLEANER BRACKET

8. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY






(a) Remove the nut from the control shaft lever.
(b) Disconnect the control cable from the control shaft lever.






(c) Remove the clip and disconnect the control cable from the control cable bracket.
NOTE: Do not hold the resin guide pipe.

9. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY






(a) Disconnect the park/neutral position switch connector.






(b) Remove the nut, washer and the control shaft lever.






(c) Using a screwdriver, pry up the lock plate.






(d) Remove the lock nut and the lock plate.






(e) Remove the 2 bolts and pull out the park/neutral position switch.