Removal

2GR-FE STARTING: STARTER: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE COOL AIR INTAKE DUCT SEAL

3. REMOVE V-BANK COVER SUB-ASSEMBLY

4. REMOVE NO. 2 AIR CLEANER INLET

5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

7. REMOVE NO. 1 AIR CLEANER INLET

8. REMOVE STARTER ASSEMBLY






(a) Disconnect the terminal 50 connector from the starter assembly.
(b) Remove the nut and disconnect the wire harness from terminal 30.
(c) Remove the 2 bolts and starter assembly.