Removal

STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU: REMOVAL

REMOVAL

1. PRECAUTION
Steering System

2. SEPARATE CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Repair Instruction - Initialization

3. REMOVE FRONT DOOR SCUFF PLATE LH Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER Removal

5. REMOVE INSTRUMENT PANEL AIR BAG ASSEMBLY LOWER NO.1 Removal

6. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU
(a) Disconnect the connectors from the multiplex tilt and telescopic ECU.
(b) Using a socket wrench (+), remove the 2 screws and multiplex tilt and telescopic ECU.