Removal

NAVIGATION ECU:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE DECK BOARD SUB-ASSEMBLY Removal

3. REMOVE TONNEAU COVER ASSEMBLY
4. REMOVE JACK CARRIER ASSEMBLY Removal

5. REMOVE FRONT DECK FLOOR BOX Removal

6. REMOVE REAR DECK FLOOR BOX Removal

7. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY Removal

8. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY Removal

9. REMOVE REAR FLOOR FINISH PLATE Removal

10. REMOVE SIDE DECK TRIM BOX LH Removal

11. REMOVE SIDE DECK TRIM BOX RH
12. REMOVE NAVIGATION ECU
(a) Disconnect each connector.






(b) Remove the 3 nuts and the navigation ECU.
13. REMOVE DISC PLAYER BRACKET






(a) Remove the 2 screws and the disc player bracket.
14. REMOVE NO. 2 DISC PLAYER BRACKET






(a) Remove the 2 screws and the No. 2 disc player bracket.