Installation

VOLTAGE INVERTER:

INSTALLATION

1. INSTALL VOLTAGE INVERTER






(a) Connect the connector.
(b) Install the voltage inverter with the 3 nuts.
2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH Installation

3. INSTALL ROPE HOOK Installation

4. INSTALL REAR SEAT SIDE COVER LH Installation

5. INSTALL REAR NO.1 SEAT BELT ASSEMBLY OUTER LH Installation

6. INSTALL DECK SIDE TRIM COVER LH Installation

7. INSTALL REAR FLOOR FINISH SIDE PLATE LH Installation

8. INSTALL REAR FLOOR FINISH PLATE
9. INSTALL DECK SIDE TRIM BOX LH Installation

10. INSTALL DECK SIDE TRIM BOX RH
11. INSTALL BACK DOOR WEATHERSTRIP
12. INSTALL DECK NO.3 BOARD SUB-ASSEMBLY Installation

13. INSTALL DECK NO.2 BOARD SUB-ASSEMBLY Installation

14. INSTALL DECK FLOOR BOX REAR Installation

15. INSTALL DECK FLOOR BOX FRONT Installation

16. INSTALL JACK CARRIER ASSEMBLY
17. INSTALL JACK ASSEMBLY
18. INSTALL JACK CARRIER SUPPORT
19. INSTALL TONNEAU COVER ASSEMBLY
20. INSTALL DECK BOARD SUB-ASSEMBLY Installation

21. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
22. INSTALL REAR DOOR SCUFF PLATE LH Installation

23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
24. PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from negative battery terminal. Repair Instruction - Initialization