Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR:

INSTALLATION

1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY





(a) Install the millimeter wave radar sensor assembly with the 3 bolts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the connector.
2. INSTALL FRONT BUMPER ASSEMBLY Installation
3. INSTALL COOL AIR INTAKE DUCT SEAL Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. ADJUST MILLIMETER WAVE RADAR SENSOR Adjustments
6. PERFORM INITIALIZATION
NOTE:
Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.

7. VEHICLE PREPARATION FOR FOG LIGHT AIM Adjustments
8. PREPARATION FOR FOG LIGHT AIMING Adjustments
9. FOG LIGHT AIMING INSPECTION Adjustments
10. FOG LIGHT AIMING ADJUSTMENT Adjustments