Removal

MIRROR: OUTER MIRROR SWITCH: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Removal
3. REMOVE CONSOLE UPPER PANEL ASSEMBLY Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
5. REMOVE FRONT DOOR SCUFF PLATE LH Removal
6. REMOVE FRONT DOOR OPENING TRIM COVER LH Removal
7. REMOVE INSTRUMENT SIDE PANEL LH Removal
8. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Removal
9. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal





10. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
(a) Remove the 2 screws.
(b) Using a screwdriver, detach the 2 claws.
HINT: Tape the screwdriver tip before use.

(c) Remove the control panel and then disconnect each connector.