Installation

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION

INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH





(a) Install the switch with the 2 screws.
(b) Connect the connector.
2. INSTALL STEERING WHEEL ASSEMBLY Installation
3. INSTALL STEERING WHEEL PAD Installation
4. INSTALL NO. 3 STEERING WHEEL COVER LOWER
5. INSTALL NO. 2 STEERING WHEEL COVER LOWER
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

8. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.