Removal

2GR-FSE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE SERVICE PLUG GRIP Removal
3. REMOVE COOL AIR INTAKE DUCT SEAL Removal
4. REMOVE V-BANK COVER Removal
5. REMOVE NO. 1 AIR CLEANER INLET Removal
6. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM Service and Repair
7. REMOVE ENGINE UNDER COVER
8. REMOVE REAR ENGINE UNDER COVER LH
9. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE Removal
10. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE Removal
11. REMOVE ELECTRIC INVERTER COMPRESSOR Removal
12. REMOVE CRANKSHAFT POSITION SENSOR





(a) Disconnect the sensor connector.
(b) Remove the bolt and sensor.