Installation

2UZ-FE EMISSION CONTROL: AIR PUMP: INSTALLATION

INSTALLATION

1. INSTALL AIR PUMP ASSEMBLY





(a) Install the 3 insulators to the air pump assembly.
(b) Install the air pump assembly with the 3 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
2. INSTALL AIR PUMP ASSEMBLY WITH BRACKET





(a) Install the air pump assembly with the 4 bolts.
Torque: 16 Nm (163 kgf-cm, 12 ft-lbf)
(b) Connect the pressure sensor connector for the air injection system.
(c) Connect the air switching valve connector.
(d) Connect the No. 2 air hose to the air switching valve.
3. INSTALL WATER BY-PASS PIPE SUB-ASSEMBLY Installation
4. INSTALL INTAKE MANIFOLD ASSEMBLY Installation
5. CONNECT HOSES TO INTAKE MANIFOLD Installation
6. CONNECT CONNECTORS TO INTAKE MANIFOLD Installation
7. CONNECT NO. 2 FUEL HOSE
8. CONNECT FUEL HOSE Installation
9. INSTALL AIR CLEANER HOSE ASSEMBLY
10. INSTALL V-BANK COVER SUB-ASSEMBLY Installation
11. ADD ENGINE COOLANT Service and Repair
12. CHECK FOR ENGINE COOLANT LEAK On-Vehicle Inspection
13. CHECK FOR FUEL LEAK Testing and Inspection