Removal

DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH: REMOVAL

REMOVAL

1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG Disassembly
2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY Disassembly
3. REMOVE COURTESY LIGHT ASSEMBLY Disassembly
4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Disassembly
5. REMOVE FRONT DOOR TRIM COVER Disassembly
6. REMOVE FRONT DOOR SERVICE HOLE COVER Disassembly
7. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY Disassembly
8. REMOVE FRONT DOOR OUTSIDE HANDLE COVER Disassembly
9. REMOVE FRONT DOOR OUTSIDE HANDLE SUB-ASSEMBLY

(a) Remove the hole plug.
(b) Using a "torx" socket wrench (T30), loosen the screw and remove the front door outside handle cover and the door lock key cylinder as a unit.
HINT:
The screw cannot be removed because it is integrated into the front door outside handle frame sub-assembly.

(e) Remove the front door outside handle sub-assembly as shown in the illustration.