Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2009 >> IS 250 AWD V6-2.5L (4GR-FSE) >> Repair and Diagnosis >> Body and Frame >> Locks >> Power Locks >> Testing and Inspection >> Component Tests and General Diagnostics >> Power Door Lock Control System >> Driver Side Door Lock Motor Circuit
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Driver Side Door Lock Motor Circuit








DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: Driver Side Door Lock Motor Circuit

Driver Side Door Lock Motor Circuit

DESCRIPTION

The driver's door lock motor is built into the driver's door lock assembly.
The main body ECU RH controls the driver's door lock motor to lock/unlock the driver's door. This ECU applies current from terminal ACT+ to terminal ACTD to operate the motor to lock the door. It reverses the direction of the current flow to operate the motor to unlock the door.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. INSPECT FRONT DOOR LOCK ASSEMBLY (DOOR LOCK MOTOR)




(a) Remove the front door lock assembly LH.
(b) Apply battery voltage and check operation of the door lock motor.
OK:






NG -- REPLACE FRONT DOOR LOCK ASSEMBLY
OK -- Continue to next step.
2. CHECK WIRE HARNESS (FRONT DOOR LOCK ASSEMBLY - MAIN BODY ECU RH)




(a) Disconnect the front door lock assembly LH connector.
(b) Disconnect the ECU (cowl side J/B RH) connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:






NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
pro multis · About Operation CHARM