Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2009 >> IS 250 AWD V6-2.5L (4GR-FSE) >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Acceleration/Deceleration Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR: INSTALLATION

INSTALLATION

1. INSTALL YAW RATE AND ACCELERATION SENSOR





(a) Connect the connector.





(b) Install the yaw rate and acceleration sensor with the 2 bolts.
Torque: 15 Nm (148 kgf-cm, 11 ft-lbf)
- Do not damage the yaw rate and acceleration sensor.
- Make sure that the yaw rate and acceleration sensor is installed securely.

(c) Install the 2 wire harness clamps.
2. INSTALL NO. 2 REAR AIR DUCT (for Automatic Transmission) Installation
3. INSTALL NO. 2 REAR AIR DUCT (for Manual Transmission) Installation
4. INSTALL CONSOLE BOX
HINT:
Refer to the instructions for installation of the console box Installation.

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION
HINT:
Programming and Relearning.

7. INSPECT SENSOR SIGNAL
HINT:
Test Mode Procedure.
pro multis · About Operation CHARM