Connecting Rod, Engine

Connecting rod diameter
Mark1 51.000 to 51.006 mm (2.0079 to 2.0081 in.)
Mark2 51.007 to 51.012 mm (2.0081 to 2.0083 in.)
Mark3 51.013 to 51.018 mm (2.0084 to 2.0086 in)
Mark4 51.019 to 51.024 mm (2.0086 to 2.0088 in.)

Connecting rod thrust clearance
Standard 0.25 to 0.40 mm (0.0098 to 0.0157 in.)
Maximum 0.50 mm (0.020 in.)

Connecting rod out-of alignment
Maximum 0.05 mm (0.0020 in.) per 100 mm (3.94 in.)

Connecting rod twist
Maximum 0.15 mm (0.0059 in.) per 100 mm (3.94 in.)

Connecting rod cap x Connecting rod
1st Pass: 25 Nm (250 kgf-cm, 28 ft.lbf)
2nd Pass: Turn 90°