Removal

2GR-FSE EMISSION CONTROL: HEATED OXYGEN SENSOR (for Sensor 2): REMOVAL

REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal
2. REMOVE NO. 1 CONSOLE UPPER PANEL GARNISH Removal
3. REMOVE NO. 2 CONSOLE UPPER PANEL GARNISH Removal
4. REMOVE CONSOLE PANEL SUB-ASSEMBLY Removal
5. REMOVE FRONT ASH RECEPTACLE SUB-ASSEMBLY Removal
6. REMOVE CONSOLE BOX REGISTER ASSEMBLY Removal
7. REMOVE CONSOLE BOX Removal
8. DISCONNECT HEATED OXYGEN SENSOR CONNECTOR





(a) Disconnect the heated oxygen sensor connector (bank 1).





(b) Disconnect the heated oxygen sensor connector (bank 2).
9. REMOVE HEATED OXYGEN SENSOR





(a) Disconnect the grommets from the body.





(b) Using the SST, remove the heated oxygen sensors from the exhaust pipe assembly.
SST: 09224-00010