Removal

1UR-FSE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal
3. REMOVE NO. 1 AIR CLEANER INLET Removal
4. REMOVE INTAKE AIR CONNECTOR PIPE Removal
5. REMOVE NO. 1 ENGINE UNDER COVER Service and Repair
6. DRAIN ENGINE COOLANT Service and Repair
7. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
(a) Disconnect the engine coolant temperature sensor connector.





(b) Using a 19 mm ball joint lock nut wrench, remove the sensor and gasket.
(c) Remove the gasket from the engine coolant temperature sensor.