Installation

1UR-FSE ENGINE CONTROL SYSTEM: VVT SENSOR: INSTALLATION

INSTALLATION

1. INSTALL VVT SENSOR

(a) Install the 4 VVT sensors with the 4 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the 4 VVT sensor connectors.
2. INSTALL AIR CLEANER ASSEMBLY RH

(a) Install the air cleaner case with the 2 nuts and clip.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
(b) Install the element to the air cleaner case.

(c) Install the air cleaner cap to the air cleaner case with the 2 clips.
Torque: 3.8 Nm (39 kgf-cm, 34 in-lbf)
- Insert the protrusion of the air cleaner hose into the hole of the hose clamp.
- The hose clamp can be tightened within the range of 2.0 N*m (20 kgf*cm, 18 in.*lbf) to 5.5 N*m (56 kgf*cm, 49 in.*lbf).

(d) Connect the MAF meter connector.
3. INSTALL AIR CLEANER ASSEMBLY LH

(a) Install the air cleaner case with the 2 nuts and clip.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
(b) Install the element to the air cleaner case.