Removal

2UR-FSE ENGINE CONTROL SYSTEM: MASS AIR FLOW METER: REMOVAL

REMOVAL
HINT: When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY LH
(a) Disconnect the MAF meter connector.
(b) Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap LH.
3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY RH
(a) Disconnect the MAF meter connector.
(b) Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap RH.
4. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY (for Bank 1)





(a) Remove the 2 screws and MAF meter.
5. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY (for Bank 2)





(a) Remove the 2 screws and MAF meter.