Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2009 >> RX 350 AWD V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Body and Frame >> Locks >> Trunk / Liftgate Lock >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Trunk / Liftgate Lock: Testing and Inspection








DOOR LOCK: BACK DOOR LOCK: INSPECTION

INSPECTION

1. INSPECT BACK DOOR LOCK ASSEMBLY (W/O POWER BACK DOOR SYSTEM)





(a) Check operation of the door lock.
(1) Using a screwdriver, push the latch in order to put the back door lock in the locked condition (full-latch position).
(2) Apply battery voltage to the door lock and check operation of the latch.
OK:





HINT: If the result is not as specified, replace the door lock assembly.





(b) Measure the resistance according to the value(s) in the table below.
Standard resistance (Courtesy switch):





HINT: If the result is not as specified, replace the door lock assembly.

2. INSPECT BACK DOOR LOCK ASSEMBLY (W/ POWER BACK DOOR SYSTEM)





(a) Check operation of the door lock.
(1) Using a screwdriver, push the latch in order to put the back door lock in the locked condition (full-latch position).
(2) Apply battery voltage to the door lock and check operation of the latch.
OK:





HINT: If the result is not as specified, replace the door lock assembly.
(3) Apply battery voltage to the door lock motor and check operation of the motor.
OK:





HINT: If the result is not as specified, replace the door lock assembly.





(b) Measure the resistance according to the value(s) in the table below.
Standard resistance (Courtesy switch):





HINT: If the result is not as specified, replace the door lock assembly.

(c) Measure the resistance according to the value(s) in the table below.
Standard resistance (Full-latch switch):





HINT: If the result is not as specified, replace the door lock assembly.

(d) Measure the resistance according to the value(s) in the table below.
Standard resistance (Half-latch switch):





HINT: If the result is not as specified, replace the door lock assembly.

(e) Measure the resistance according to the value(s) in the table below.
(1) Full-latch:
Connect the battery positive (+) lead to connector terminal 7 and the negative (-) lead to connector terminal 5.
Standard resistance:





HINT: If the result is not as specified, replace the door lock assembly.
(2) Over-latch:
Connect the battery positive (+) lead to connector terminal 5 and the negative (-) lead to connector terminal 7.
Standard resistance:





HINT: If the result is not as specified, replace the door lock assembly.
pro multis · About Operation CHARM