Removal

2GR-FE FUEL: FUEL PRESSURE PULSATION DAMPER: REMOVAL

REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE
HINT:
Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. DRAIN ENGINE COOLANT Testing and Inspection
4. REMOVE ENGINE ROOM COVER SIDE Removal
5. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal
6. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal
7. REMOVE FRONT FENDER TO COWL SIDE SEAL LH
8. REMOVE FRONT FENDER TO COWL SIDE SEAL RH
9. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal
10. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal
11. REMOVE COWL TOP PANEL OUTER SUB-ASSEMBLY Removal
12. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
13. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
14. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal
15. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY





(a) Remove the clip.
(b) Pull out the fuel pressure pulsation damper from the fuel delivery pipe.
(c) Remove the O-ring from the fuel pressure pulsation damper.