Connecting Rod, Engine

Connecting rod cap x Connecting rod
1st 25 Nm (255 kgf-cm, 18 ft-lbf)
2nd Turn 90°

Connecting rod out-of alignment Maximum 0.05 mm (0.0020 in.) per 100 mm (3.94 in.)
Connecting rod twist Maximum 0.15 mm (0.0059 in.) per 100 mm (3.94 in.)

Connecting rod bushing inside diameter 22.005 to 22.014 mm (0.8663 to 0.8667 in.)
Oil clearance
Standard 0.005 to 0.011 mm (0.0002 to 0.0004 in.)
Maximum 0.03 mm (0.0012 in.)

Connecting rod bolt diameter
Standard 7.2 to 7.3 mm (0.283 to 0.287 in.)
Maximum 7.0 mm (0.276 in.)

Piston pin hole inside diameter 22.001 to 22.010 mm (0.8662 to 0.8665 in.)