Installation

BRAKE CONTROL: REAR SPEED SENSOR: INSTALLATION

INSTALLATION

1. INSTALL REAR SPEED SENSOR RH





(a) Install the sensor with the bolt.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)
(b) Install the No. 2 clamp with the nut.
Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)
(c) Connect the sensor connector.
2. INSTALL REAR SPEED SENSOR LH





(a) Install the sensor with the bolt.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)
(b) Install the No. 1 clamp with the bolt.
Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)
(c) Install the No. 2 and No. 3 clamps with the bolt and nut.
Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)
(d) Connect the height control sensor connector, and then install the resin clamp and clamp bolt.
Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)
(e) Connect the sensor and height control sensor connector.
3. INSTALL REAR SEATBACK ASSEMBLY Installation
4. INSTALL REAR SEAT HEADREST ASSEMBLY Installation
5. INSTALL REAR SEAT HEADREST PLATE Installation
6. INSTALL WIND DEFLECTOR BOARD ASSEMBLY Installation
7. INSTALL REAR SEAT HEADREST PLATE COVER Installation
8. INSTALL REAR SEAT CUSHION ASSEMBLY Installation
9. INSTALL REAR WHEEL
(a) Install the wheel with the 5 nuts.
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)
(b) Install the ornament with the 10 bolts.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)
10. CHECK ABS SPEED SENSOR SIGNAL
(a) Check the speed sensor signal Test Mode Procedure.