Tire Pressure Warning System Initialization

How to initialize the tire pressure warning system

1. Park the vehicle in a safe place and turn the engine switch to "OFF" position.

While the vehicle is moving, initialization is not performed.

2. Adjust the tire inflation pressure to the specified cold tire inflation pressure level.

Make sure to adjust the tire pressure to the specified cold tire inflation pressure level. The tire pressure warning system will operate based on this pressure level.

3. Turn the engine switch to "ON" position.
4. Push and hold the tire pressure warning reset switch until the tire pressure warning light blinks slowly three times.
5. Wait for a few minutes with the engine switch "ON", and then turn the engine switch to "OFF" position.