Replacement

3UZ-FE CHARGING: GENERATOR: REPLACEMENT

REPLACEMENT

1. REPLACE FRONT BEARING

(a) Remove the 4 screws and bearing retainer.

(b) Using SST and a press, press out the bearing.
SST: 09223-00010

(c) Using SST and a press, press in a new bearing.
SST: 09950-60010
(d) Install the bearing retainer with the 4 screws.
Torque: 2.3 Nm (24 kgf-cm, 20 in-lbf)
2. REPLACE REAR BEARING

(a) Using SST, remove the bearing cover (outside) and bearing.
SST: 09820-00021
NOTE:
Be careful not to damage the fan.

(b) Remove the bearing cover (inside).

(d) Using SST and a press, press in a new bearing.
SST: 09820-00031

(e) Using SST, push in the bearing cover (outside).
SST: 09285-76010