Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








3UZ-FE STARTING: STARTER: INSTALLATION

INSTALLATION

1. INSTALL STARTER ASSEMBLY





(a) Install the wire clamp to the wire protector with the bolt.
Torque: 9.8 Nm (100 kgf-cm, 87 in-lbf)
(b) Connect the starter cable with the nut.
Torque: 9.8 Nm (100 kgf-cm, 87 in-lbf)
(c) Connect the starter connector.





(d) Install the starter with the 2 bolts.
Torque: 39 Nm (398 kgf-cm, 29 ft-lbf)
2. INSTALL WATER BY-PASS PIPE SUB-ASSEMBLY Installation
3. INSTALL REAR WATER BY-PASS JOINT Installation
4. INSTALL INTAKE MANIFOLD SUB-ASSEMBLY
(a) Install the intake manifold Installation.