Removal

DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Front Side): REMOVAL

1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG Disassembly

2. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY Disassembly

3. REMOVE COURTESY LIGHT ASSEMBLY Disassembly

4. REMOVE DOOR ARMREST COVER Disassembly

5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Disassembly

6. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP Disassembly

7. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY Removal

8. REMOVE FRONT NO. 1 DOOR TRIM BRACKET Disassembly

9. REMOVE FRONT DOOR SERVICE HOLE COVER Disassembly

10. REMOVE FRONT DOOR OUTSIDE HANDLE COVER Disassembly

11. REMOVE FRONT DOOR OUTSIDE HANDLE SUB-ASSEMBLY

(a) Remove the hole plug.





(b) Using a "TORX" socket wrench (T30), loosen the screw and remove the front door outside handle cover and the door lock key cylinder as a unit.

HINT
The screw cannot be removed because it is integrated into the front door outside handle frame sub-assembly.

(c) Disconnect the connector.





(d) Using a "TORX" socket wrench (T30), loosen the screw.

(e) Remove the front door outside handle assembly as shown in the illustration.