Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2010 >> GX 460 V8-4.6L (1UR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Power Steering Pressure Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





1UR-FE ENGINE CONTROL: POWER STEERING OIL PRESSURE SWITCH: INSTALLATION

1. INSTALL POWER STEERING OIL PRESSURE SWITCH

(a) Install a new O-ring to the power steering oil pressure switch.

(b) Apply a light coat of engine oil to the O-ring.

(c) Using SST, install the power steering oil pressure switch.

SST : 09922-10010

without SST - Torque : 21 Nm (210 kgf-cm, 15 ft-lbf)

with SST - Torque : 15 Nm (148 kgf-cm, 11 ft-lbf)

Text in Illustration





HINT
* Use a torque wrench with a fulcrum length of 30 cm (11.8 in.). When using a torque wrench with a fulcrum length that is not 30 cm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Service Precautions.
* Make sure SST and the torque wrench are connected in a straight line.





(d) Connect the power steering oil pressure switch connector.

2. INSTALL FAN AND GENERATOR V BELT

(a) Install the fan and generator V belt Installation.

3. ADD POWER STEERING FLUID

4. BLEED AIR FROM POWER STEERING SYSTEM Initial Inspection and Diagnostic Overview

5. INSPECT FOR POWER STEERING FLUID LEAK

6. CHECK POWER STEERING FLUID LEVEL Initial Inspection and Diagnostic Overview

7. INSTALL FRONT FENDER APRON SEAL RH Installation

8. INSTALL FRONT WHEEL Installation
pro multis · About Operation CHARM