Connecting Rod, Engine

Connecting rod cap

1st 40 Nm (408 kgf-cm, 30 ft lb)
2nd Turn 90°

Connecting rod big end inside diameter

Mark 1 56.000 to 56.006 mm (2.20472 to 2.20496 in.)
Mark 2 56.006 to 56.012 mm (2.20496 to 2.20519 in.)
Mark 3 56.012 to 56.018 mm (2.20519 to 2.20543 in.)
Mark 4 56.018 to 56.024 mm (2.20543 to 2.20566 in.)

Thrust clearance
Standard 0.15 to 0.55 mm (0.00591 to 0.0217 in.)
Maximum 0.70 mm (0.0276 in.)