Cellular Phone Cannot Send/Receive

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM (w/o Navigation System): Cellular Phone cannot Send/Receive
- Cellular Phone cannot Send/Receive

INSPECTION PROCEDURE

PROCEDURE

1. CHECK "BLUETOOTH" SETTINGS

(a) Check if the "Bluetooth" settings are correct.

OK:

"Bluetooth" settings are correct.

NG -- SET CORRECTLY
OK -- Continue to next step.

2. CHECK CELLULAR PHONE

(a) Check if the cellular phone is "Bluetooth" compatible.

HINT
Some versions of "Bluetooth" compatible cellular phones may not function.

OK:

Phone is "Bluetooth" compatible.

NG -- END (ONLY A "BLUETOOTH" COMPATIBLE CELLULAR PHONE CAN BE USED)
OK -- Continue to next step.

3. CHECK SETTINGS

(a) Check if the cellular phone functions.

HINT
The cellular phone is unable to call when any of the following conditions are met:

* The cellular phone is locked.
* The directory is being transferred.
* The line is crossed.
* Outside service range.
* The power is off.
* The cellular phone is not connected to "Bluetooth" ("BT" is displayed while connected).

OK:

None of the above conditions exist.

NG -- SET CORRECTLY
OK -- Continue to next step.

4. CHECK CELLULAR PHONE

(a) Check if the cellular phone can make a call.

HINT
When the battery is low, calls cannot be made or received.

OK:

Cellular phone can make a call.

NG -- REPAIR OR REPLACE CELLULAR PHONE
OK -- Continue to next step.

5. CHECK RECEPTION

(a) Set the cellular phone so that it can receive calls.

(b) Place the cellular phone close to the radio receiver assembly.

(c) Check if the cellular phone has reception according to the radio receiver assembly.

OK:

Cellular phone has reception.

NG -- REPLACE RADIO RECEIVER ASSEMBLY Removal

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table