Installation

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY

(a) Install the switch.





(b) Install the 2 screws.





(c) Connect the connector and clamp.





2. INSTALL STEERING PAD Installation

3. INSTALL SWITCH AND VOLUME CASE Installation

4. INSTALL NO. 2 STEERING WHEEL COVER LOWER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.

6. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

7. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.