Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2010 >> LS 460 RWD V8-4.6L (1UR-FSE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair >> Heated Oxygen Sensor >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





1UR-FSE ENGINE CONTROL SYSTEM: HEATED OXYGEN SENSOR (for 2WD): INSTALLATION

1. INSTALL HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)





(a) Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

SST : 09224-00010

without SST - Torque : 44 Nm (449 kgf-cm, 32 ft-lbf)

with SST - Torque : 40 Nm (408 kgf-cm, 30 ft-lbf)

HINT
Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).

(b) Install the grommet to the vehicle.

(c) Connect the heated oxygen sensor connector.





2. INSTALL HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)





(a) Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

SST : 09224-00010

without SST - Torque : 44 Nm (449 kgf-cm, 32 ft-lbf)

with SST - Torque : 40 Nm (408 kgf-cm, 30 ft-lbf)

HINT
Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).

(b) Install the grommet to the vehicle.

(c) Connect the heated oxygen sensor connector.





3. INSTALL REAR NO. 2 AIR DUCT

4. INSTALL REAR NO. 1 AIR DUCT

5. INSTALL FRONT FLOOR SILENCER PAD LH

6. INSTALL FRONT FLOOR SILENCER PAD RH

7. INSTALL COWL SIDE TRIM BOARD LH Installation

8. INSTALL COWL SIDE TRIM BOARD RH Installation

9. INSTALL FRONT DOOR SCUFF PLATE LH Installation

10. INSTALL FRONT DOOR SCUFF PLATE RH Installation
pro multis · About Operation CHARM