From 08/2009
AUDIO / VIDEO: REAR SEAT ENTERTAINMENT SYSTEM: Multi-display Controller Power Source Circuit
- Multi-display Controller Power Source Circuit
DESCRIPTION
This is the power source circuit of the multi-display controller sub-assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK HARNESS AND CONNECTOR (MULTI-DISPLAY CONTROLLER SUB-ASSEMBLY POWER SOURCE)
(a) Disconnect the multi-display controller sub-assembly connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table