Pinout Values and Diagnostic Parameters

THEFT DETERRENT / KEYLESS ENTRY: REMOTE ENGINE STARTER SYSTEM: TERMINALS OF ECU

1. CHECK REMOTE ENGINE STARTER ECU

(a) Disconnect the e1 remote engine starter ECU connector.





(b) Measure the resistance and voltage according to the value(s) in the table below.

HINT
Measure the values on the wire harness side with the connector disconnected.





(b) If the result is not as specified, there may be a malfunction in the wire harness.

(c) Reconnect the e1 remote engine starter ECU connector.

(d) Measure the voltage according to the value(s) in the table below.





(d) If the result is not as specified, the remote engine starter may have a malfunction.