Installation
SEAT: FRONT SEAT ASSEMBLY: INSTALLATION
1. INSTALL FRONT SEAT ASSEMBLY
(a) Place the seat in the cabin.
NOTICE:
Be careful not to damage the vehicle body.
(b) Connect the connector under the seat.
(c) Install the seat with the 4 bolts.
Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)
(d) Install the 4 seat track covers.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3. PERFORM INITIALIZATION
(a) Perform initialization Testing and Inspection.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
4. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.