Installation

BRAKE CONTROL: STEERING ANGLE SENSOR: INSTALLATION

1. INSTALL STEERING SENSOR

2. ADJUST CENTER FRONT WHEEL

3. INSTALL TURN SIGNAL SWITCH ASSEMBLY Installation

4. INSTALL SPIRAL CABLE SUB-ASSEMBLY Installation

5. POSITION SPIRAL CABLE Installation

6. INSTALL STEERING WHEEL ASSEMBLY Installation

7. CHECK STEERING WHEEL CENTER POINT

8. INSTALL STEERING PAD ASSEMBLY Installation

9. INSTALL STEERING PAD SWITCH MODULATOR

10. INSTALL SWITCH AND VOLUME CASE

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

12. PERFORM INITIALIZATION

(a) Perform initialization. Testing and Inspection

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

13. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.