Installation

BRAKE CONTROL: FRONT SPEED SENSOR: INSTALLATION

HINT
* Use the same procedures for the LH side and RH side.
* The procedures listed below are for the LH side.
1. INSTALL FRONT SPEED SENSOR LH

(a) Install the sensor with the bolt.





Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

(b) Install the sensor harness with the 2 clamp bolts and resin clip.

Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)

(c) Connect the sensor connector.





2. INSTALL FRONT FENDER LINER LH

3. INSTALL FRONT WHEEL

(a) Install the wheel with the 5 nuts.

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)

(b) Install the ornament with the 10 bolts.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

4. CHECK ABS SPEED SENSOR SIGNAL

(a) Check the ABS speed sensor signal Test Mode Procedure.