Removal

BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR: REMOVAL

1. REMOVE CONSOLE UPPER PANEL GARNISH FRONT Removal

2. REMOVE FRONT CONSOLE UPPER PANEL ASSEMBLY Removal

3. REMOVE CONSOLE BOX PLATE Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

6. REMOVE CONSOLE BOX REGISTER ASSEMBLY Removal

7. REMOVE CONSOLE BOX Removal

8. REMOVE NO. 2 CONSOLE BOX DUCT

(a) Remove the 2 clips and the No. 2 console box duct.





9. REMOVE NO. 1 CONSOLE BOX DUCT

(a) Remove the clip and the No. 1console box duct.





10. REMOVE YAW RATE SENSOR

(a) Separate the 2 wire harness clamps.





(b) Remove the 2 bolts and yaw rate sensor.

NOTICE:
Do not remove the sensor from the bracket.

(c) Disconnect the yaw rate sensor connector.