Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2011 >> GX 460 V8-4.6L (1UR-FE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Body and Frame >> Power Seat Control Module >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





SEAT: POWER SEAT CONTROL ECU (for Rear No. 2 Seat): INSTALLATION

NOTICE:
* If the fold seat control ECU is replaced with a new one, perform initialization (initial position memorization) of the fold seat control ECU Rear Power Seat Control System.
* If the fold seat control ECU is exchanged with one from another vehicle, perform initialization (initial position reset and initial position memorization) of the fold seat control ECU Rear Power Seat Control System.

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. INSTALL FOLD SEAT CONTROL ECU

(a) Install the ECU with the 2 nuts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the 2 connectors.

(c) Install the 3 clips.

2. INSTALL DECK BOARD ASSEMBLY Installation

3. PERFORM INITIALIZATION

NOTICE:
* If the fold seat control ECU is replaced with a new one, perform initialization (initial position memorization) of the fold seat control ECU Rear Power Seat Control System.
* If the fold seat control ECU is exchanged with one from another vehicle, perform initialization (initial position reset and initial position memorization) of the fold seat control ECU Rear Power Seat Control System.

4. CHECK REAR NO. 2 SEAT

(a) Check the power seat operation Operation Check.
pro multis · About Operation CHARM