Procedures Necessary When Cable Is Disconnected/Reconnected to Battery Terminal

PROCEDURES NECESSARY WHEN CABLE IS DISCONNECTED/RECONNECTED TO BATTERY TERMINAL

a. THE WORK LIST
1. Each inspection procedure as follows.







NOTICE:
- After the battery is reconnected, be sure to wait 10 seconds or more before attempting to start the engine. The engine may not start immediately after the battery is reconnected.
- w/Navigation System (for HDD):
After the engine switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the engine switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.